flow360.WallRotation#
- class WallRotation[source]#
Bases:
Flow360BaseModel
WallRotation
class to specify the rotational velocity model for the Wall boundary condition.The wall rotation model prescribes a rotational motion at the wall by defining a center of rotation, an axis about which the wall rotates, and an angular velocity. This model can be used to simulate rotating components or surfaces in a flow simulation.
Example
>>> fl.Wall( ... entities=volume_mesh["fluid/wall"], ... velocity=fl.WallRotation( ... axis=(0, 0, 1), ... center=(1, 2, 3) * u.m, ... angular_velocity=100 * u.rpm ... ), ... use_wall_function=True, ... )
- center: Annotated[_VectorType, PlainSerializer(func=_dimensioned_type_serializer, return_type=PydanticUndefined, when_used=always)] [Required]#
The center of rotation
- Constraints:
func = <function _dimensioned_type_serializer at 0x7e935604e320>
return_type = PydanticUndefined
when_used = always
- axis: Axis [Required]#
The axis of rotation.
- angular_velocity: Annotated[_AngularVelocityType, PlainSerializer(func=_dimensioned_type_serializer, return_type=PydanticUndefined, when_used=always)] = 'The value of the angular velocity.'#
- Constraints:
func = <function _dimensioned_type_serializer at 0x7e935604e320>
return_type = PydanticUndefined
when_used = always